:Base Rhino Marine.hlp
1 Getting Started
2 Welcome=001_Common_Rhino_Marine_Welcome
2 Requirements=001_Common_Requirements
2 About the tutorials=001_Common_Introduction
2 Using the online tutorial file=001_Common_Using_the_online_tutorial_file
2 Technical support=001_Common_Technical_support>Main
2 How to print=001_Common_How_to_print
2 Glossary=001_Common_Glossary
1 Fairing Curves and Surfaces
2 Create fair curves and surfaces=001_Common_Create_fair_curves_and_surfaces
2 Characteristics of fairness=001_Common_Characteristics_of_fairness
2 Use few points=001_Common_Use_few_points
2 Use few curves=001_Common_Use_few_curves
2 Maintain station relationships=001_Common_Maintain_station_relationships
2 Using the curvature graph for fairing=001_Common_Using_the_curvature_graph_for_fairing
2 Steps to achieving fairness=001_Common_Steps_to_achieving_fairness
2 Fairing to simple curves=001_Common_Fairing_to_simple_curves
2 Analyzing the hull curves=001_Common_Analyzing_the_hull_curves
2 Fairing the curves=001_Common_Fairing_the_curves
2 Refining the curve shapes=001_Common_Refining_the_curve_shapes
2 Bow profiles=001_Common_Bow_profiles
2 Create the surface=001_Common_Create_the_surface
2 Assess the surface fairness=001_Common_Assess_the_surface_fairness
2 Final fairing of the surface=001_Common_Final_fairing_of_the_surface
1 Seine Skiff
2 Introduction=003_Skiff_Introduction
2 Lay out the hull curves=003_Skiff_Lay_out_the_hull_curves
2 Check for fairness=003_Skiff_Check_for_fairness
2 Curvature graph=003_Skiff_Curvature_graph
2 Rebuild the curves=003_Skiff_Rebuild_the_curves
2 Stand the profile up=003_Skiff_Stand_the_profile_up
2 Create the three-dimensional curves=003_Skiff_Create_the_three_dimensional_curves
2 About the curves=003_Skiff_About_the_curves
2 Loft the hull surfaces=003_Skiff_Loft_the_hull_surfaces
2 Loft the chine and centerlines=003_Skiff_Loft_the_chine_and_centerlines
2 Trim the bow to the buttock line=003_Skiff_Trim_the_bow_to_the_buttock_line
2 Check the results=003_Skiff_Check_the_results
2 Build the transom=003_Skiff_Build_the_transom
2 Draw the construction circle=003_Skiff_Draw_the_construction_circle
2 Draw the trimming lines=003_Skiff_Draw_the_trimming_lines
2 Trim the construction circle=003_Skiff_Trim_the_construction_circle
2 Extrude the surface=003_Skiff_Extrude_the_surface
2 Build the camber curve=003_Skiff_Build_the_camber_curve
2 Draw construction lines=003_Skiff_Draw_construction_lines
2 Draw the camber arc=003_Skiff_Draw_the_camber_arc
2 Trim the transom=003_Skiff_Trim_the_transom
2 Create the centerline and deadflat=003_Skiff_Create_the_centerline_and_deadflat
2 Trim the transom surface=003_Skiff_Trim_the_transom_surface
2 Complete the transom and check for unjoined edges=003_Skiff_Complete_the_transom_and_check_for_unjoined_edges
2 Analyze the surfaces=003_Skiff_Analyze_the_surfaces
2 Environment map analysis=003_Skiff_Environment_map_analysis
2 Zebra stripe analysis=003_Skiff_Zebra_stripe_analysis
2 Surface curvature analysis (Gaussian)=003_Skiff_Surface_curvature_analysis_Gaussian_
2 Complete the hull=003_Skiff_Complete_the_hull
2 Mirror the hull and transom=003_Skiff_Mirror_the_hull_and_transom
2 Create the deadflat surface=003_Skiff_Create_the_deadflat_surface
2 Join the two hull halves and deadflat surface=003_Skiff_Join_the_two_hull_halves_and_deadflat_surface
2 Unroll the plates=003_Skiff_Unroll_the_plates
2 Prepare the hull for unrolling=003_Skiff_Prepare_the_hull_for_unrolling
2 Place marking lines=003_Skiff_Place_marking_lines
2 Unroll the transom=003_Skiff_Unroll_the_transom
1 Sailboat
2 Introduction=004_Sailboat_Introduction
2 Lay out the hull=004_Sailboat_Lay_out_the_hull
2 Lay out the sheer=004_Sailboat_Lay_out_the_sheer
2 Lay out the rabbet profile=004_Sailboat_Lay_out_the_rabbet_profile
2 Lay out the transom profile=004_Sailboat_Lay_out_the_transom_profile
2 Fair the two-dimensional curves=004_Sailboat_Fair_the_two_dimensional_curves
2 Create the three-dimensional sheer=004_Sailboat_Create_the_three_dimensional_sheer
2 Construct preliminary stations=004_Sailboat_Construct_preliminary_stations
2 Create the bow stations=004_Sailboat_Create_the_bow_stations
2 Loft the hull surface=004_Sailboat_Loft_the_hull_surface
2 Adjust the surface=004_Sailboat_Adjust_the_surface
2 Modify the forefoot=004_Sailboat_Modify_the_forefoot
2 Analyze the surface=004_Sailboat_Analyze_the_surface
2 Environment map=004_Sailboat_Environment_map
2 Curvature analysis=004_Sailboat_Curvature_analysis
2 Mirror and join the hull surface=004_Sailboat_Mirror_and_join_the_hull_surface
2 Create the deadflat=004_Sailboat_Create_the_deadflat
2 Join the sides and deadflat=004_Sailboat_Join_the_sides_and_deadflat
2 Add the transom=004_Sailboat_Add_the_transom
2 Create the camber curve=004_Sailboat_Create_the_camber_curve
2 Finish the transom=004_Sailboat_Finish_the_transom
2 Add the deck=004_Sailboat_Add_the_deck
2 Diagnostics=004_Sailboat_Diagnostics
2 Calculate hydrostatics=004_Sailboat_Calculate_hydrostatics
2 Generate GHS File=004_Sailboat_Generate_GHS_File
2 Create the lines drawing=004_Sailboat_Create_the_lines_drawing
1 Offshore Racer
2 Introduction=005_Offshore_Introduction
2 Lay out the hull curves=005_Offshore_Lay_out_the_hull_curves
2 Fair the two-dimensional curves=005_Offshore_Fair_the_two_dimensional_curves
2 Create the three-dimensional curves=005_Offshore_Create_the_three_dimensional_curves
2 Import the stations=005_Offshore_Import_the_stations
2 Prepare the station curves=005_Offshore_Prepare_the_station_curves
2 Define the side panel shape=005_Offshore_Define_the_side_panel_shape
2 Prepare the bottom stations=005_Offshore_Prepare_the_bottom_stations
2 Loft the hull surfaces=005_Offshore_Loft_the_hull_surfaces
2 Adjust the surface=005_Offshore_Adjust_the_surface
2 Modify the bottom surface=005_Offshore_Modify_the_bottom_surface
2 Construct the chine strakes=005_Offshore_Construct_the_chine_strakes
2 Join the hull and check for unjoined edges=005_Offshore_Join_the_hull_and_check_for_unjoined_edges
2 Analyze the surfaces=005_Offshore_Analyze_the_surfaces
2 Environment map analysis=005_Offshore_Environment_map_analysis
2 Curvature analysis=005_Offshore_Curvature_analysis
2 Create the transom=005_Offshore_Create_the_transom
2 Build the transom=005_Offshore_Build_the_transom
2 Construct the camber curve=005_Offshore_Construct_the_camber_curve
2 Draw the camber arc=005_Offshore_Draw_the_camber_arc
2 Copy the camber arc into position=005_Offshore_Copy_the_camber_arc_into_position
2 Trim the transom=005_Offshore_Trim_the_transom
2 Join the transom to the hull=005_Offshore_Join_the_transom_to_the_hull
2 Create the deck=005_Offshore_Create_the_deck
2 Create deck beams=005_Offshore_Create_deck_beams
2 Loft the deck beam curves=005_Offshore_Loft_the_deck_beam_curves
2 Trim the deck with the hull and join=005_Offshore_Trim_the_deck_with_the_hull_and_join
2 Diagnostics=005_Offshore_Diagnostics
2 Prepare the model for the strakes=005_Offshore_Prepare_the_model_for_the_strakes
2 Model the strakes=005_Offshore_Model_the_strakes
2 Trim the hull to create a space for the strakes=005_Offshore_Trim_the_hull_to_create_a_space_for_the_strakes
2 Create the strake surfaces=005_Offshore_Create_the_strake_surfaces
2 Trim the strake surfaces=005_Offshore_Trim_the_strake_surfaces
2 Blend the gap between the strakes and hull=005_Offshore_Blend_the_gap_between_the_strakes_and_hull
2 Create a blend surface between the strakes and the hull=005_Offshore_Create_a_blend_surface_between_the_strakes_and_the_hull
2 Join and check the hull=005_Offshore_Join_and_check_the_hull
2 Trim the hull to the transom surface=005_Offshore_Trim_the_hull_to_the_transom_surface
2 Marry the bottom with strakes into the hull model=005_Offshore_Marry_the_bottom_with_strakes_into_the_hull_model
2 Add the cockpit and cabin=005_Offshore_Add_the_cockpit_and_cabin
2 Create the cockpit curves=005_Offshore_Create_the_cockpit_curves
2 Extrude the cockpit curve and trim=005_Offshore_Extrude_the_cockpit_curve_and_trim
2 Create the cockpit sole=005_Offshore_Create_the_cockpit_sole
2 Create the opening in the deck in way of the cabin=005_Offshore_Create_the_opening_in_the_deck_in_way_of_the_cabin
2 Create the aft cabin bulkhead=005_Offshore_Create_the_aft_cabin_bulkhead
2 Create the cabin top=005_Offshore_Create_the_cabin_top
2 Create the cabin top=005_Offshore_Create_the_cabin_top_1
2 Create the cabin sides=005_Offshore_Create_the_cabin_sides
2 Copy the cabin/deck assembly to the original model=005_Offshore_Copy_the_cabin_deck_assembly_to_the_original_model
1 Motoryacht Hull
2 Introduction=006_Motoryacht_Hull_Introduction
2 Prepare the curves from the designer's lines=006_Motoryacht_Hull_Prepare_the_curves_from_the_designer_s_lines
2 Copy the required 2-D curves to the new model=006_Motoryacht_Hull_Copy_the_required_2_D_curves_to_the_new_model
2 Fair the two-dimensional curves=006_Motoryacht_Hull_Fair_the_two_dimensional_curves
2 Create the three-dimensional stem wrapper tangent=006_Motoryacht_Hull_Create_the_three_dimensional_stem_wrapper_tangent
2 Construct the phantom station=006_Motoryacht_Hull_Construct_the_phantom_station
2 Extend the station tops aft=006_Motoryacht_Hull_Extend_the_station_tops_aft
2 Loft the hull surface=006_Motoryacht_Hull_Loft_the_hull_surface
2 Trim to the rabbet / forefoot / stem wrapper=006_Motoryacht_Hull_Trim_to_the_rabbet_forefoot_stem_wrapper
2 Analyze surface fairness=006_Motoryacht_Hull_Analyze_surface_fairness
2 Create keel flat, forefoot, and stem wrapper=006_Motoryacht_Hull_Create_keel_flat_forefoot_and_stem_wrapper
2 Extend the stem wrapper to the sheer=006_Motoryacht_Hull_Extend_the_stem_wrapper_to_the_sheer
2 Trim the aft sheer=006_Motoryacht_Hull_Trim_the_aft_sheer
2 Create the swim step transom chine and trim the hull=006_Motoryacht_Hull_Create_the_swim_step_transom_chine_and_trim_the_hull
2 Create the swim step transom=006_Motoryacht_Hull_Create_the_swim_step_transom
2 Create the swim step=006_Motoryacht_Hull_Create_the_swim_step
2 Create the transom bulwark=006_Motoryacht_Hull_Create_the_transom_bulwark
2 Add the whaleback and sheer strake=006_Motoryacht_Hull_Add_the_whaleback_and_sheer_strake
2 Create the whaleback sheer=006_Motoryacht_Hull_Create_the_whaleback_sheer
2 Create the whaleback stem wrapper=006_Motoryacht_Hull_Create_the_whaleback_stem_wrapper
2 Create the camber curve=006_Motoryacht_Hull_Create_the_camber_curve
2 Add the decks=006_Motoryacht_Hull_Add_the_decks
2 Create the step between the main deck and the raised deck=006_Motoryacht_Hull_Create_the_step_between_the_main_deck_and_the_raised_deck
1 Motoryacht Superstructure
2 Introduction=007_Motoryacht_Superstructure_Introduction
2 Fair the curves in 2-D=007_Motoryacht_Superstructure_Fair_the_curves_in_2_D
2 Prepare the 2-D lines for export=007_Motoryacht_Superstructure_Prepare_the_2_D_lines_for_export
2 Build the main deck=007_Motoryacht_Superstructure_Build_the_main_deck
2 Construct the housetops=007_Motoryacht_Superstructure_Construct_the_housetops
2 Build the deckhouse sides=007_Motoryacht_Superstructure_Build_the_deckhouse_sides
2 Add the windows=007_Motoryacht_Superstructure_Add_the_windows
2 Build the visors=007_Motoryacht_Superstructure_Build_the_visors
2 Build the visor mullions=007_Motoryacht_Superstructure_Build_the_visor_mullions
2 Add the caps around the visor tops=007_Motoryacht_Superstructure_Add_the_caps_around_the_visor_tops
2 Loft the forward visor caps=007_Motoryacht_Superstructure_Loft_the_forward_visor_caps
2 Loft the aft visor cap=007_Motoryacht_Superstructure_Loft_the_aft_visor_cap
2 Create the windshields=007_Motoryacht_Superstructure_Create_the_windshields
2 Build the railings=007_Motoryacht_Superstructure_Build_the_railings
2 Build the stacks=007_Motoryacht_Superstructure_Build_the_stacks
2 Build the mast=007_Motoryacht_Superstructure_Build_the_mast
2 Mast side surfaces=007_Motoryacht_Superstructure_Mast_side_surfaces
2 Radar flats=007_Motoryacht_Superstructure_Radar_flats
1 Reference
2 About the Author=001_Common_About_the_Author
2 How to nudge control points=001_Common_How_to_nudge_control_points
2 What to do about unjoined edges=001_Common_What_to_do_about_unjoined_edges
